Part Number Hot Search : 
2600P 2008N DEVICE 201R0 3042DMA 2S161 DDC124EK M5106
Product Description
Full Text Search
 

To Download HD74LS257FPEL Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 HD74LS257
Quadruple 2-line-to-1-line Data Selectors / Multiplexers (with not inverted 3-state outputs)
REJ03D0469-0300 Rev.3.00 Jul.15.2005 This multiplexer features three-state outputs that can interface directly with and drive data lines of bus-organized systems. With all but one of the common outputs disabled (at a high-impedance state) the low impedance of the single enabled output will drive the bus line to a high or low logic level. To minimize the possibility that two outputs will attempt to take a common bus to opposite logic levels, the outputenable circuitry is designed such that the output disable times are shorter than the output enable times.
Features
* Ordering Information
Part Name HD74LS257P HD74LS257FPEL Package Type DILP-16 pin SOP-16 pin (JEITA) Package Code (Previous Code) PRDP0016AE-B (DP-16FV) Package Abbreviation P Taping Abbreviation (Quantity) -- EL (2,000 pcs/reel)
PRSP0016DH-B FP (FP-16DAV) Note: Please consult the sales office for the above package availability.
Pin Arrangement
Select 1A 1B 1Y 2A 2B 2Y GND
1 S 2 3 4 5 6 7 8 1A 1B 1Y 2A 2B 2Y 3Y OC 4A 4B 4Y 3A 3B
16 15 14 13 12 11 10 9
VCC Output Control 4A 4B 4Y 3A 3B 3Y
(Top view)
Rev.3.00, Jul.15.2005, page 1 of 5
HD74LS257
Function Table
Inputs OC H L L L L S X L L H H A X L H X X B X X X L H Output Z L H L H
Note: H; high level, L; low level, X; irrelevant, Z; off (high-impedance) state of a 3-state output
Block Diagram
Output Control 1A 1B 2A 2B 3A 3B 4A 4B 4Y 3Y 2Y 1Y
S
Absolute Maximum Ratings
Item Supply voltage Input voltage Output voltage (off-state) Operating temperature Power dissipation Storage temperature Symbol VCC VIN VO (off) Topr PT Tstg Ratings 7 7 5.5 -20 to +75 400 -65 to +150 Unit V V V C mW C
Note: Voltage value, unless otherwise noted, are with respect to network ground terminal.
Recommended Operating Conditions
Item Supply voltage Output current Operating temperature Symbol VCC IOH IOL Topr Min 4.75 -- -- -20 Typ 5.00 -- -- 25 Max 5.25 -2.6 8 75 Unit V mA mA C
Rev.3.00, Jul.15.2005, page 2 of 5
HD74LS257
Electrical Characteristics
(Ta = -20 to +75 C)
Item Input voltage Symbol VIH VIL VOH Output voltage VOL S S except S S except S S except Output current IIH IIL II IOZ min. 2.0 -- 2.4 -- -- -- -- -- -- -- -- -- -- typ.* -- -- -- -- -- -- -- -- -- -- -- -- -- max. -- 0.8 -- 0.5 0.4 40 20 -0.8 -0.4 0.2 0.1 20 -20 Unit V V V V A mA mA A Condition
VCC = 4.75 V, VIH = 2 V, VIL = 0.8 V, IOH = -2.6 mA IOL = 8 mA VCC = 4.75 V, VIH = 2 V, IOL = 4 mA VIL = 0.8 V VCC = 5.25 V, VI = 2.7 V VCC = 5.25 V, VI = 0.4 V VCC = 5.25 V, VI = 7 V VO = 2.4 V VO = 0.4 V VCC = 5.25 V, VIH = 2 V
Input current
Short-circuit output current IOS -30 -- -130 mA VCC = 5.25 V All outputs high -- 5.9 10 Supply ICC mA VCC = 5.25 V All outputs low -- 9.2 16 current** All outputs off -- 10 19 Input clamp voltage VIK -- -- -1.5 V VCC = 4.75 V, IIN = -18 mA Notes: * VCC = 5 V, Ta = 25C ** ICC is measured with all outputs open and all possible inputs grounded while achieving the stated output conditions.
Switching Characteristics
(VCC = 5 V, Ta = 25C)
Item Symbol tPLH tPHL tPLH tPHL tZH tZL tHZ tLZ Inputs A, B S OC OC Output Y Y Y Y min. -- -- -- -- -- -- -- -- typ. 12 12 14 14 20 20 18 16 max. 18 18 21 21 30 30 30 25 Unit ns ns ns ns CL = 5 pF, RL = 2 k CL = 15 pF, RL = 2 k Condition
Propagation delay time
Output enable time Output disable time
Rev.3.00, Jul.15.2005, page 3 of 5
HD74LS257
Testing Method
Test Circuit
VCC 4.5V RL
See Function Table
Input P.G. Zout = 50
OC S A B Y
Output
S1
5k CL
S2
Notes:
1. CL includes probe and jig capacitance. 2. All diodes are 1S2074(H).
Waveform
tTHL Output Control 90% 1.3V 3V 10% tZL 4.5V Waveform 1
S1 closed, S2 open
tTLH 90% 1.3V 3V 0V tLZ
S1 and, S2 closed
0V
10%
1.3V VOL tHZ VOH 0.5V
1.5V VOL VOH 1.5V
tZH Waveform 2
S1 open, S2 closed
1.3V 0V
0.5V
S1 and, S2 closed
Notes:
1. Input pulse; tTLH 15 ns, tTHL 6 ns, PRR = 1 MHz, duty cycle = 50% 2. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. 3. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
Rev.3.00, Jul.15.2005, page 4 of 5
HD74LS257
Package Dimensions
JEITA Package Code P-DIP16-6.3x19.2-2.54 RENESAS Code PRDP0016AE-B Previous Code DP-16FV MASS[Typ.] 1.05g
D
16
9
1 0.89 b3
8
Z
E
A1
A
Reference Symbol
Dimension in Millimeters Min Nom 7.62 19.2 6.3 20.32 7.4 5.06 0.51 0.40 0.48 1.30 0.19 0 2.29 2.54 0.25 0.31 15 2.79 1.12 2.54 0.56 Max
e D E
L
1
A A1
e
bp
e1
b c b c
p 3
e Z ( Ni/Pd/Au plating ) L
JEITA Package Code P-SOP16-5.5x10.06-1.27
RENESAS Code PRSP0016DH-B
Previous Code FP-16DAV
MASS[Typ.] 0.24g
*1
D F 9
16
NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET.
bp
HE
E
Index mark
Reference Symbol
*2
c
Dimension in Millimeters Min Nom 10.06 5.50 Max 10.5
Terminal cross section ( Ni/Pd/Au plating )
1 Z e
*3
D E A2
8 bp x M L1
A1 A bp b1 c
0.00
0.10
0.20 2.20
0.34
0.40
0.46
0.15
1
0.20
0.25
A
c
HE
0 7.50 7.80 1.27
8 8.00
A1
y L
e x y
0.12 0.15 0.80 0.50
1
Detail F
Z L L 0.70 1.15
0.90
Rev.3.00, Jul.15.2005, page 5 of 5
Sales Strategic Planning Div.
Keep safety first in your circuit designs!
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> 2-796-3115, Fax: <82> 2-796-2145
http://www.renesas.com
Renesas Technology Malaysia Sdn. Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510
(c) 2005. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .3.0


▲Up To Search▲   

 
Price & Availability of HD74LS257FPEL

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X